Skin Pigmentation & Tightening
Mosaic 3D Technology
Mosaic 3D redefines non-ablative resurfacing with an advanced 1550nm laser designed to revitalize and brighten your skin. Mosaic 3D has unified air-cooled rolling and sapphire tip stamping into one versatile and efficacious platform.
What is Mosaic 3D?
Mosaic 3D is an advanced fractional laser technology with customized settings, targeting specific skin concerns with unparalleled accuracy. 3D Controlled Chaos Technology (3D CCT) adds a new dimension to our patented 2D CCT scanning. By optimizing the distribution and depth of multi-depth microbeams, 3D CCT allows for an increase in treatment coagulation volume per stamp, without sacrificing safety.
This state-of-the-art treatment is designed to maximize collagen penetration without having the downtime of injuring the surface of the skin while maintaining its natural integrity. It’s a versatile solution for a variety of skin concerns, including:
- Fine lines and wrinkles
- Acne scars and surgical scars
- Uneven skin tone and texture
- Sun damage and pigmentation
- Enlarged pores
What Happens During My Treatment?
Your provider will apply numbing cream prior to your treatment. The 3D laser technology will then begin, you will feel your provider stretching the skin and the pressure of the device, but it will be painless.
Mosaic 3D is an upgrade to existing non-ablative fractional resurfacing devices to stimulate collagen at 3 different depths. Patients describe the Mosaic treatment as a tingling sensation from multi-depth microbeams moving around a square grid pattern. Most patients describe the sensation as “mild to moderate” discomfort. The treatment time may range from 30-60 minutes.
Depending upon your expectations, you should see results showing a brighter complexion after a single treatment. However maximum results will come with 2-3 treatments. Discuss your expectations with our office.
Mosaic 3D Results and Recovery
One of the best parts of Mosaic 3D is the minimal downtime. Immediately following the treatment, you will notice some redness and possible swelling, which will lessen over the next day or so. The following 5-6 days, your skin will have a dry sandpaper-like texture. This is normal and will resolve as your skin exfoliates, revealing fresher clearer skin. Improvements in skin tone and texture can be seen within a few weeks, with full results developing over time as collagen production continues.
Total Skin Solution
Total Skin Solution is a partnership between our lasers, Lutronic Ultra and Lutronic Genius. Total Skin Solution works to contour the face and body, tighten the skin, improve acne scarring, and minimize lines and wrinkles.
What is Total Skin Solution?
Lutronic Genius uses Radiofrequency microneedling (collagen induction therapy) to treat against signs of aging in the deeper layers of the skin. These create a micro-injury to the skin to start the collagen renewal process for firm and rejuvenated skin.
Lutronic Ultra is a cutting-edge laser with low-downtime resurfacing the skin. Ultra comfortably delivers non-ablative laser energy to correct the early signs of sun damage and aging—no matter the season or skin type—for a brighter, clearer complexion.
These treatments are combined in a single session for a minimal pain and downtime experience.
What Happens During My Treatment?
Your provider may apply numbing cream prior to your treatment. At the beginning of treatment, you will be injected with lidocaine to numb all layers of the skin. Radiofrequency microneedling will then begin, you will feel your provider stretching the skin and the pressure of the device, but it will be painless.
Following Genius, you will receive the Lutronic Ultra treatment. The optimized controls allow us to tune the laser to a level of aggressiveness that matches the severity of your skin issues in order to provide a customized outcome for each individual client. Patients describe the Ultra treatment as a warm, tingling sensation, which may vary. Most patients describe the sensation as mild discomfort.
Total Skin Solution Results and Recovery
Immediately following the treatment, you will notice some redness and possible swelling, which will lessen over the next day or so. The following 5-6 days, your skin will have a dry sandpaper-like texture. This is normal and will resolve as your skin exfoliates, revealing fresher clearer skin.
NEW! Ellacor®: The Facelift Replacement
What is Ellacor®?
Ellacor® with micro-coring technology is the first and only device of its kind that removes skin on the microscale for a 90% improvement in the appearance of wrinkles. Ellacor® provides natural-looking results with a quick procedure and minimal downtime. Over 86% of patients are satisfied with their Ellacor® results!
How does Ellacor® work?
Ellacor® uses hollow needles to remove micro-cores of skin, resulting in an improved appearance of moderate and severe wrinkles without the evidence of scarring.
Benefits of an Ellacor® Procedure:
- Safe and quick procedure with minimal downtime
- In-office procedure performed under local anesthesia
- Visible, natural-looking results
- Diminishes the appearance of wrinkles by 90%
- Precisely removes excess skin from targeted areas
What to expect from an Ellacor® procedure?
On the day of your procedure, you will receive local anesthetic to the treated area to help you stay comfortable during the procedure. Once your skin is numb, Dr. Desjarlais will strategically place the Ellacor® device to your skin to create micro-cores in a precise grid pattern. Excess skin will be removed through hollow needles, but the micro-cores are so tiny that they will begin to heal almost immediately.
Forever Young BBL
The Forever Young BBL Laser from Sciton, a leader in laser technology, can make your skin look younger, look healthier, and reduce the aging process. With continued use, based on an individualized treatment plan, the Forever Young BBL can keep you looking younger, as you’re getting older!
What is Forever Young BBL?
The technology behind the Forever Young BBL photo facial device allows Dr. Desjarlais to customize the wavelength and adjust the adapters to treat several conditions in just one session. Studies have been following patients treated with the Forever Young BBL laser for over 10 years. Patients are most happy with their results when treated within a customized plan developed by their doctor. Generally speaking, for optimal results, 2-3 treatments per year are ideal.
What Happens During My Treatment?
Dr. Desjarlais and our cosmetic team will work with you to develop a customized treatment plan. During the treatment, light energy is used to heat the outer most layers of the skin to stimulate collagen production. At the same time, a photo thermal energy targets and eliminates the fine vessels that can cause redness and pigmented lesions.
Forever Young BBL Results and Recovery
Zero downtime! The Forever Young BBL laser allow patients the luxury of no downtime. Many patients leave the office and return to work immediately after their treatment. Our patients with more sensitive skin may experience some redness that can easily be covered up with use of minimal makeup.
LaseMD Lutronic Ultra Skin Rejuvenation
Lutronic Ultra is a cutting-edge laser with low-downtime resurfacing the skin. Ultra comfortably delivers non-ablative laser energy to correct the early signs of sun damage and aging—no matter the season or skin type—for a brighter, clearer complexion.
What is Lutronic Ultra?
Lutronic Ultra creates tiny thermal zones in the skin, prompting the body to quickly generate new tissue. Ultra is a non-ablative 1927nm wavelength that targets water in the upper skin layers to trigger the body’s natural healing processes for a gentle treatment with little-to-no downtime. The Ultra can be used on the face, neck or chest to treat mild to moderate:
- Age Spots
- Freckles
- Sun Spot
- Pigmented Lesions
- Sun Damage
- Actinic Keratosis
Ultra treats many signs of aging and produces brighter skin in as little as a single treatment—although 2-4 are recommended.
Perfect for patients who are early in their skin care journey. Within the prejuvenation demographic, these treatments delay the appearance of aging and maintain beautiful skin with the least downtime or discomfort.
What Happens During My Treatment?
Your provider may apply numbing cream prior to your treatment. This laser uses non-ablative, fractionated treatments to rebuild skin. The optimized controls allow us to tune the laser to a level of aggressiveness that matches the severity of your skin issues in order to provide a customized outcome for each individual client. Patients describe the Ultra treatment as a warm, tingling sensation, which may vary. Most patients describe the sensation as “mild to moderate” discomfort. The treatment time may range from 5-20 minutes or longer.
Depending upon your expectations, you may see results after a single treatment while other skin conditions could require several visits. Discuss your expectations with our office.
Lutronic Ultra Results and Recovery
Immediately following the treatment, you will notice some redness which will lessen over the next day or so. The following 5/-6 days, your skin will have a dry sandpaper-like texture. This is normal and will resolve as your skin exfoliates, revealing fresher clearer skin.
Lutronic DermaV
Vascular lesions arise from natural sources including sun damage, genetics and the aging process. DermaV is proven to treat a wide range of vascular conditions, including rosacea, facial veins, broken capillaries, and spider veins on the body, legs, and ankles.
What is DermaV?
The DermaV™ Laser is a state-of-the-art treatment designed to treat hyperpigmentation, redness, sun damage, spider veins, rosacea, broken capillaries, and more. DermaV™ is quite gentle and only requires anywhere from 2-5 sessions for optimal results. Because the DermaV™ Laser technology works to boost collagen production over time, you can expect your results to continually improve for up to three months after the initial session.
If you struggle with rosacea, spider veins, or broken capillaries, DermaV™ Laser may be the treatment you’ve been looking for. The DermaV™ Laser is a novel laser treatment used to reduce the appearance of hyperpigmentation, redness, and sun damage on the face, neck, and chest. The DermaV™ laser gradually reduces redness and photodamage.
What Happens During My Treatment?
Dr. Desjarlais and our cosmetic team will work with you to develop a customized treatment plan. During the treatment, DermaV applies laser energy that is absorbed by your blood vessels and converted to heat, which contracts and eventually eliminates them. Using controlled heating, DermaV’s laser energy targets unwanted, visible pigment while protecting the top layers of your skin with patented cooling technology.
DermaV Results and Recovery
You may experience mild redness and puffiness immediately following the laser, but you should be able to return to normal activities right away. Some lesions may immediately disappear while others will take time to be broken down and removed by your body. Your skin will continue to regenerate and rejuvenate for several weeks.
BBL Ultra Skin Rejuvenation
- Age Spots
- Freckles
- Sun Spot
- Sun Damage
- Actinic Keratosis
- Redness
- Facial Veins
- Pores
- Fine Lines
BBL Ultra Results and Recovery
Immediately following the treatment, you will notice some redness which will lessen over the next day or so. The following 5/-6 days, your skin will have a dry sandpaper-like texture. This is normal and will resolve as your skin exfoliates, revealing fresher clearer skin.
You will be sensitive to ultraviolet light and you must avoid direct sun exposure until completely healed. Fully cover your skin or use a 30+ SPF (We recommend a mineral sunscreen).
Halo Hybrid Fractional Laser
Finally, get the results you want without the downtime you would expect. Sciton, an authority in aesthetic lasers has introduced the Halo Hybrid Fractional Laser and Dr. Desjarlais was one of the first doctors in the country to offer this revolutionary treatment.
What is the Halo?
The Halo is the world’s first hybrid fractional laser. It simultaneously delivers non-ablative and ablative wavelengths in a single pass over the skin.
An ablative laser has long been considered one of the most effective treatments for improving the signs of aging. By removing the outer layers of damaged skin, the skin is forced to heal, increase collagen production and restructure, making way for tighter, rejuvenated skin. The downfall of an ablative laser is the recovery and downtime needed, often 1-2 weeks.
A non-ablative laser treatment is far less invasive with little-to-no downtime. By heating up the outer layers of skin but not removing them, a non-ablative laser treatment is popular for patients who need to return to their everyday lives right after treatment. The downfall here is a series of several treatments are needed to achieve desired results with a non-ablative procedure.
The Halo Hybrid Fractional Laser focuses energy on the deeper collagen layer of skin leaving the surface of your skin largely intact for a quicker healing time. It delivers the results of an ablative procedure with little-to-no downtime, like a non-ablative treatment. The best of both worlds!
What Happens During My Treatment?
You can expect to be at the office for 2-2 ½ hours. The first hour is spent applying the numbing cream and allowing it to take effect. The treatment itself takes 30-45 minutes. In-office recovery time is 30 minutes where a mineral water mist dissipates the heat from your skin.
Halo Results and Recovery
Immediately after your Halo treatment, a restorative skin cream will be applied to the treated areas to keep the skin moist. Swelling and redness is common and expected after treatment. The area may also feel extremely warm for 12-24 hours post op. Cold compresses will help calm the warmth in your skin and help reduce swelling.
When leaving the office, you will look like you’ve been in the sun a bit too long, but you can resume your normal business day.
On the second or third day after treatment, you will begin to notice tiny dark spots and a bronzed appearance to the treated skin. This is part of the healing process where treated tissue is working its way out of your body as new fresh skin is regenerated. During this time, your skin will be very dry and have a sandpaper texture. It will begin to flake and peel. For the face, this can last 5-7 days. If the neck, chest or anywhere else on the body was treated, this process could take up to two weeks.
After the peeling process is complete, your skin will have a rosy, pink glow that will gradually resolve. Sunscreen is a MUST throughout the entire healing process. It should be applied daily beginning the day of treatment and used vigilantly for up to three months post procedure. A post op kit will be provided to you for cleansing and exfoliating the skin. Any post treatment discomfort may be relieved by over the counter oral pain relievers.
Sciton® Profractional Treatment
- Mild to moderate fine lines and wrinkles
- Sun damaged skin
- Acne scarring
- Surgical scarring
- Skin laxity
- Depleted collagen
- Rough skin texture
IntraGen Skin Tightening
Morpheus8
The InMode Morpheus8 is the only subdermal adipose remodeling device (SARD) designed for full-body use. Enjoy a minimally invasive, non-surgical treatment to revitalize the collagen in your skin and achieve a more youthful appearance.
What is Morpheus8?
InMode’s Morpheus8 is a unique device utilizing microneedles and radiofrequency energy to stimulate collagen production (collagen induction therapy) deep in the layers of the dermis. By targeting these subdermal layers, Morpheus8’s fractional technology helps remodel your skin to produce incredible anti-aging results.
The primary benefits of Morpheus8 are:
- Revitalizes collagen production
- Uniform effect across the treated area
- Minor or no thermal damage to the skin
- Safe for all skin tones
- Low risk of post-inflammatory hyperpigmentation
What Happens During My Treatment?
Morpheus8 uses a matrix of microneedles to penetrate the dermis and reach the ideal depth, allowing the device to release radiofrequency energy which heats the sub-dermal layers and stimulates collagen production. The device can be used on any area of your body, with areas such as the face, neck and abdomen being most commonly treated.
You can expect to be in the office for 2-2 ½ hours. The first hour is spent applying a numbing cream to the desired areas and allowing it time to take effect. While rolling laser treatment can be completed in 20-30 minutes, microneedling treatment can take 30-45 minutes on average, though it could take more or less time depending on the scope of the area being treated.
Morpheus8 Results and Recovery
For most patients, the ideal results can be achieved in as few as 1 to 3 treatments. In-office recovery time is minimal.
Following treatment, a recovery cream is applied, and patients are recommended to keep the area moisturized. Mild redness may occur, and make-up should not be applied to the treated area for 1-2 days.
OmniLux Light Therapy
OmniLux – Blue, Revive, and Plus is the light treatment utilized effectively in our office LED systems for 81% clearance in treating acne. Treating mild to moderate inflammatory acne vulgaris.
OmniLux has been the subject of more than forty-five independent peer reviews and published clinical studies over the past two decades. It is extremely effective in treating acne. Its collagen stimulatory effects are complementary and even compatible to other procedures.
What is OmniLux?
OmniLux offers only the wavelengths of light that have been proven in clinical trials to be highly effective in treating acne, vitiligo, psoriasis, rosacea, periorbital wrinkles, overall skin rejuvenation, as well as to accelerate wound healing.
What Happens During My Treatment?
This therapy generally requires a series of 6 to 8 treatments performed on clean skin over a 4 to 8-week period. OmniLux treatment is completely pain-free, repairs and energizes targeted skin cells at the cellular level, leaves no scars, and has zero down-time. Many patients find their 15-20 minute sessions under the OmniLux to be very refreshing!
OmniLux Results and Recovery
OmniLux light therapy stimulates natural processes that continue well after the treatment series has stopped. While dramatic improvement can usually be seen in the 2nd week of treatment, optimum results will be seen 4-8 weeks after the course of treatments is completed.
SilkPeel Microdermabrasion
Imagine combining your microdermabrasion treatment with the power of your medical grade skincare, in one 45-minute visit to our office. That is what the SilkPeel Dermalinfusion can do for you! Treat acne, discoloration, dryness, enlarged pores, fine lines and wrinkles, and walk away with fresh, glowing skin.
What is SilkPeel?
SilkPeel is the only medical grade in-office procedure with patented Dermalinfusion technology to treat a wide variety of visible skin conditions, on the face and body. It is a noninvasive treatment (no incisions or cutting at all) performed by a trained laser technician.
The technology behind the SilkPeel combines the highest quality (diamond assisted) microdermabrasion treatment with a simultaneous delivery of topical serums deep into the surface of the skin and down to the base of the pores. That is Dermalinfusion. No other device uses true Dermalinfusion technology. It’s an exclusive SilkPeel patent!
To achieve the most optimal results, Dr. Desjarlais may recommend a series of SilkPeel treatments over a period of time. SilkPeel can reduce the appearance of:
- Adult Acne
- Acne Scarring
- Hyperpigmentation (freckles and dark spots on the skin)
- Sun Damage
- Uneven Skin Tone
Skin imperfections do not only happen on the face. This revolutionary technology can treat and improve the skin’s appearance all over the body; chest, back, arms, legs, etc.
What Happens During My Treatment?
After cleaning and prepping your skin for treatment, our laser technician will glide the SilkPeel’s small handpiece over your skin. Patients report feeling a very gentle, vacuum-like feeling with no pain. Typical treatments last 45 minutes.
SilkPeel Results and Recovery
The best part about a SilkPeel treatment is returning to your daily activities immediately! There is no downtime. Your skin may appear flushed immediately after treatment, but most patients see that subside within 30 minutes. If possible, it is best to leave the skin makeup free for as long as you can.
FaceTite
Minimally Invasive Facial Contouring in Just One Treatment
What is FaceTite?
FaceTite is a new procedure that is comparable to a surgical facelift, without the large scars. FaceTite provides dramatic improvement in skin laxity on the face and neck, which was previously only attainable through a surgical procedure such as facelift. FaceTite utilizes minimally invasive radio-frequency energy to melt fat and tighten skin.
By avoiding a facelift procedure with the large incision, patients will benefit from reduces post-procedure swelling and discomfort. This is a less traumatic process with a natural looking final result.
What Areas Can Be Treated?
Any areas on the face and neck with saggy skin can be treated. This includes the double chin, jowls and other areas with deep lines and loose skin.
What Happens During My Treatment?
FaceTite is a minimally-invasive procedure performed with a wand under local anesthesia in the in-office setting. Tiny incisions are made in the skin through which the wand is passed, heating the skin from both sides. FaceTite has numerous safeguards built into the technology to ensure uniform and gentle heating that makes the procedure comfortable and effective.
FaceTite Results and Recovery
Post procedure, most patients can go home and resume regular activities shortly after. Wearing a compression garment is required for best results.
Results can be seen immediately, with best results noticeable after 6 weeks and continuing up to 12 months.